CVEN · 10″ Shallow-Mount DVC Subwoofer
Introducing the CVEN10D2S-V5
A genuine 10″ subwoofer that needs just 81mm of mounting depth — for the under-seat, false-floor and slim boot builds where a conventional sub simply won’t go.
Every installer knows the problem. The customer wants proper low end, but the car has nowhere to put it — no spare boot space to give up, no room for a deep enclosure, and a basket depth that rules out most 10s before you’ve even started measuring.
The new CVEN10D2S-V5 is our answer. It’s a full-size 10″ cone with a mounting depth of just 81mm, built to take 750W RMS and wired through dual 2Ω voice coils so it works with almost any amplifier. Here’s what makes it tick.
10″ Shallow Subwoofer
81mm mounting depth
The headline number. A low-profile basket and mounting flange mean the CVEN10D2S-V5 sits in 81mm — shallow enough for under-seat installs, false floors and slim boot builds that would never take a conventional full-depth sub.
Crucially, it’s still a genuine 10″ cone. You’re not swapping down to an 8″ to make things fit; you keep the cone area and get the sub into spaces that used to be off-limits.
Power & Wiring
750W RMS · Dual 2Ω
Shallow doesn’t mean fragile. The CVEN10D2S-V5 is rated at 750W RMS and 1500W peak, so it’s built to take serious power from a capable amplifier.
Dual 2Ω voice coils give you flexibility on the wiring side: run the coils in parallel for a 1Ω mono load, in series for 4Ω mono, or give each coil its own channel for independent dual-channel wiring. Connections are made through chrome push terminals set into the basket, with a red button marking positive — quick, secure and hard to get wrong.
Wiring Options
Two coils, three ways to wire
1Ω Mono — Coils in Parallel
4Ω Mono — Coils in Series
Dual-channel — Coil per Channel
Tap a tab to switch wiring. Always check your amplifier is stable at the load you choose.
Under the Hood
A motor built for control
Getting 750W into a sub this shallow takes a serious motor. The CVEN10D2S-V5 is built around a large 45oz ferrite magnet driving an eight-layer voice coil.
45oz Ferrite
Firm control of the cone.
8-layer CCAW Coil
On a 61mm (2.4″) aluminium former — light, with good heat transfer.
NOMEX Spider
Consistent and durable in the boot.
Foam Surround
Free, compliant cone movement.
CVEN · Red Tier
Cone & CVEN badge
Up front is an injection-moulded cone carrying the red CVEN chevron badge, framed by the foam surround. It’s a clean, purposeful look that sits just as well on show in a custom build as it does tucked under a seat.
CVEN is VIBE’s premium sound-quality range, spanning three tiers — Red, Silver and Gold — from installer-friendly high-performance components to bespoke custom-install solutions and the ultimate in audiophile car audio. The CVEN10D2S-V5 joins the range in the Red tier.
Specifications
The numbers
Everything you need to plan an enclosure and match an amplifier. With a cut-out of Ø232mm and just 81mm of depth, the CVEN10D2S-V5 drops into spaces a standard 10″ can’t.
Ø256mm · Cut-out Ø232mm · Depth 81mm
| Model | CVEN10D2S-V5 |
|---|---|
| Configuration | 10″ Shallow Subwoofer, DVC |
| RMS Power | 750W |
| Peak Power | 1500W |
| Voice Coil Impedance | Dual 2Ω |
| Wiring Options | 1Ω mono / 4Ω mono / dual-channel |
| Sensitivity (1W / 1m) | 84.5dB |
| Frequency Response | 30Hz – 500Hz |
| Resonance Frequency (Fs) | 37Hz |
| Total Q (Qts) | 0.505 |
| Equivalent Volume (Vas) | 26.09L |
| Xmax (one-way) | 5.2mm |
| Voice Coil | 61mm (2.4″) CCAW, 8-layer |
| Magnet | Ferrite, 45oz |
| Mounting Depth | 81mm |
| Cut-out Diameter | 232mm |
| Outer Diameter | 256mm |
Gallery
Up close
Click any image to enlarge.
Available now
The CVEN10D2S-V5 — a full 10″ where there’s no room for a conventional one.