New · CVEN Series · 2″ (50 mm) Wideband Speaker
Meet the CVEN2MN-V6Tweeters vs wideband speakers: what’s the difference?
The CVEN2MN-V6 is a compact 2″ wideband speaker that drops into factory dash and tweeter locations, no fabrication needed. Here’s what it is, and why swapping a tweeter for a wideband driver changes so much.
Small, wideband, and made to fit — in the car it’s actually going into. The CVEN2MN-V6 is a proper OEM upgrade that lifts your soundstage up onto the dash.
New in the CVEN Series
Meet the CVEN2MN-V6
The CVEN2MN-V6 is a compact 2″ (50 mm) wideband speaker: a small driver that covers a broad span of the music from a single cone. It’s built as a proper OEM upgrade, and it ships with a multifit bracket that drops it straight into factory dash and tweeter locations across a wide range of vehicles.
- Drop-in OEM fit — 75+ factory dash positions across 19 models, no cutting or fabrication
- Wideband cone — far more range than the tweeter it replaces
- N35 neodymium motor — strong, light and small enough for tight OEM spots
- Efficient — enough to run straight off a head unit, or add an amp
- Sold as a pair — 2 speakers per box
Watch
The CVEN2MN-V6 in 60 seconds
The multifit bracket, the N35 neodymium motor and the vehicles it fits, all in under a minute.
- Multifit bracket: drops into factory dash spots, no fabrication
- 19 models, 75+ dash positions across Jeep, Toyota, Chevrolet and GMC
- Sold as a pair, in stock now
The big question
Tweeter vs wideband: what’s the difference?
Both are small drivers, and in a car they often live in exactly the same place: up on the dash, near ear level and in your line of sight. The difference is how much of the music they play.
A tweeter only does the top end. It handles the treble detail, and everything else, voices included, has to come from speakers lower down in the car, usually in the doors.
A wideband speaker (you’ll also hear them called full-range) covers a much broader band from a single cone. The CVEN2MN-V6 is rated from 150 Hz to 15 kHz, so it reproduces far more of the music from that same high mounting point.
Factory tweeter
Top end only
| What it plays | The top end only |
|---|---|
| Where it sits | Up high on the dash, near ear level |
| The rest of the music | Comes from lower down, in the doors |
| Soundstage | Voices pulled down towards the footwell |
CVEN2MN-V6 wideband
Broad span from one cone
| What it plays | 150 Hz – 15 kHz (rated) |
|---|---|
| Where it sits | The same factory dash or tweeter location |
| The rest of the music | Much more of it comes from up on the dash |
| Soundstage | Up on the dash, voices at a natural height |
Why it matters
Voices at a natural height, not coming from the footwell.
One of the most effective things you can do in a car is get a wideband driver up high, at ear level and in your line of sight. Drop the CVEN2MN-V6 into a factory tweeter spot and you get a wider, better-focused front stage, from a location the car already gives you.
Why we built it this way
Small driver, serious engineering
Getting a wideband driver into a shallow factory dash location means making it small without making it weak. Here’s what’s behind the cone.
Neodymium motor
An N35 neodymium magnet: small, light and strong. That’s where its sensitivity comes from, high for a driver this size.
Barely a gram
The moving mass is 1.132 g. A light moving system starts and stops with the music and catches the fine detail in the midband.
CCAW on Kapton
A copper-clad-aluminium coil, lighter than pure copper, wound on a Kapton (polyimide) former that stays light and electrically quiet.
Paper cone
A light paper cone with a rubber surround and polypropylene dust cap, in a metal basket.
Shallow fit
24 mm mounting depth and a 46 mm cut-out, so it suits the tight factory locations it’s designed for.
Head-unit friendly
Efficient enough to run without an amp. Or power it up to its 25 W RMS rating.
From the product sheet
Reading the graphs
These are the measured curves from the CVEN2MN-V6 product sheet. If you’ve not read a speaker graph before, here’s the quick version.
- SPL vs frequency shows how loud the driver plays across the audio band. Low notes are on the left and high notes on the right. The CVEN2MN-V6’s rated response runs from 150 Hz to 15 kHz.
- Impedance vs frequency shows the electrical load the speaker presents. The peak marks its free-air resonance (Fs), measured at 153.19 Hz. That’s why, for best performance, we recommend a 400 Hz high-pass at 24 dB/octave, well clear of that resonance.
SPL vs Freq
Impedance vs Freq
OEM multifit bracket
It fits where the factory speaker does
The CVEN2MN-V6 comes with a multifit bracket that uses a radial, multi-arm design with slotted mounting holes. A single bracket covers more than 75 OEM dash speaker positions across 19 models from three manufacturers.
Not every arm is used on every fitment; the unused ones simply clear the housing. The driver goes in where the factory speaker came out, cleanly and quickly, without cutting or fabricating a custom mount.
No fabrication neededVehicle compatibility
Will it fit my car?
Jeep
| Model | Years | Position | Notes |
|---|---|---|---|
| Wrangler JL / JLU | 2018–2025 | Front dash top | 2-door & 4-door; Sport, Sahara, Rubicon |
| Gladiator JT | 2020–2025 | Front dash top | All trims |
| Wrangler JK | 2007–2018 | Front dash top | Minor adjustment may be required |
Toyota
| Model | Years | Position | Notes |
|---|---|---|---|
| Camry | 2006–2024 | Front dash tweeter | 6th, 7th & 8th generation |
| Tacoma | 2005–2024 | Centre dash speaker | 2nd & 3rd gen; Access & Double Cab |
| Hilux | 2005–2024 | Dash speaker | 7th & 8th gen; global market |
| RAV4 | 2008–2022 | Front dash tweeter | 3rd, 4th & 5th generation |
| 4Runner | 2010–2024 | Front dash speaker | 5th gen; all trims |
| Highlander | 2008–2022 | Front dash tweeter | 2nd & 3rd generation |
| Tundra | 2007–2021 | Dash speaker | 2nd gen; CrewMax & Double Cab |
| Corolla | 2009–2019 | Front dash tweeter | 10th & 11th generation |
Chevrolet
| Model | Years | Position | Notes |
|---|---|---|---|
| Silverado 1500 / 2500 / 3500 | 2014–2025 | Dash top speaker | All cab styles |
| Colorado | 2015–2024 | Front dash speaker | Crew & Extended Cab |
| Equinox | 2010–2022 | Dash tweeter | 2nd & 3rd generation |
| Tahoe / Suburban | 2015–2024 | Dash top speaker | 4th & 5th generation |
| Traverse | 2018–2024 | Dash tweeter | 2nd generation |
GMC
| Model | Years | Position | Notes |
|---|---|---|---|
| Sierra 1500 / 2500 / 3500 | 2014–2025 | Dash top speaker | Shared platform with Silverado |
| Canyon | 2015–2024 | Front dash speaker | Shared platform with Colorado |
| Yukon / Yukon XL | 2015–2024 | Dash top speaker | Shared platform with Tahoe |
Tap a brand to see its models. Fitment is based on standard factory dash positions; minor adjustment may be needed for certain trims or regional variants.
Car not listed?
Additional vehicles may be compatible
The list above covers the vehicles we’ve confirmed so far. If yours isn’t on it, contact VIBE and we’ll help you check.
Beyond OEM fitment
Or build it into an active system
The same qualities that make it a good OEM upgrade, small size, wide dispersion and a clean wideband cone, also make it a strong dedicated midrange in an active or multi-way system.
Mount it in a custom A-pillar pod or sail panel, high-pass it at 400 Hz with a 24 dB/octave slope for best performance, and it does the middle of the music cleanly, between a midbass below and a tweeter above.
- OEM dash-speaker replacement, drop-in via the multifit bracket
- OEM tweeter-location upgrade, lifting the soundstage
- Custom installs: A-pillar pods, sail panels and other tight full-range locations
- Dedicated midrange in an active multi-way system, high-passed at 400 Hz, 24 dB/octave
- Head-unit or amplified systems
CVEN2MN-V6
Full specifications
Driver specification
| Configuration | 2″ midrange (single voice coil) |
|---|---|
| RMS power | 25 W |
| Sensitivity | 86 dB (2.83 V / 1 m) |
| Frequency response | 150 Hz – 15 kHz |
| Nominal impedance | 3.8 Ω |
| Cone material | Paper |
| Surround | Rubber |
| Dust cap | Polypropylene |
| Basket | Metal |
| Spider | NC, 1 off, 38 × 20.8 mm |
| Voice-coil former | Polyimide (Kapton), 20.4 × 13 mm |
| Voice-coil winding | CCAW (copper-clad aluminium), 4.4 mm height, 2-layer |
| Magnet | N35 neodymium (20 g + 4.9 g) |
| Terminal | Standard |
| Mounting depth | 24 mm |
| Mounting diameter (cut-out) | 46 mm |
Thiele/Small parameters
| Free-air resonance (Fs) | 153.19 Hz |
|---|---|
| Sensitivity (SPL) | 82.9 dB |
| Effective cone area (Sd) | 12.57 cm² |
| Motor force factor (Bl) | 2.615 T·m |
| Mechanical Q (Qms) | 4.248 |
| Electrical Q (Qes) | 0.605 |
| Total Q (Qts) | 0.53 |
| Equivalent compliance volume (Vas) | 0.21 L |
| Mechanical compliance (Cms) | 953.457 µm/N |
| Moving mass (Mms) | 1.132 g |
| Moving mass, cone only (Mmd) | 1.106 g |
| DC resistance (Re) | 3.8 Ω |
In the box
| Pack type | Pair (2 pcs) |
|---|---|
| Mounting | OEM multifit bracket |
| Gift box (L × W × D) | 25.5 × 15.5 × 5.3 cm |
| SKU | CVEN2MN-V6 |
Tap a tab to switch between the driver spec, TS parameters and what’s in the box.
Quick answers
Tweeter vs wideband: FAQs
What is the difference between a tweeter and a wideband speaker?
A tweeter only plays the top end of the music, so everything else, including voices, has to come from speakers lower down in the car, usually in the doors. A wideband (or full-range) speaker covers a much broader band from a single cone. The VIBE CVEN2MN-V6 is rated from 150 Hz to 15 kHz, so it reproduces far more of the music from the same high mounting point on the dash.
Can a wideband speaker replace a factory tweeter?
Yes. The CVEN2MN-V6 ships with an OEM multifit bracket that drops it into factory dash and tweeter locations without cutting or fabrication, lifting the soundstage up onto the dash with voices at a natural height.
Will the CVEN2MN-V6 fit my car?
The multifit bracket covers more than 75 OEM dash speaker positions across 19 models from Jeep, Toyota, Chevrolet and GMC. If your vehicle isn't listed, contact VIBE and we'll help you check.
Do I need an amplifier for the CVEN2MN-V6?
No. It's efficient enough to run straight off a head unit, and it can also be powered by an amplifier up to its 25 W RMS rating.
Where should I cross over the CVEN2MN-V6 in an active system?
For best performance, use a 400 Hz high-pass filter with a 24 dB/octave slope. That keeps it well clear of its 153 Hz free-air resonance. Used as a dedicated midrange, it sits between a midbass below and a tweeter above.
Lift your soundstage
A real step up from a factory speaker, cleanly. Swap the tweeter for the CVEN2MN-V6 and hear the difference from the same spot on the dash.
Small, wideband, made to fit.